Skip to content

What sag means and where to find your maker's numbers

Last checked November 19, 2026

The fork dives when you sit on the bike, or it never seems to move at all. Sag is the first number to look at, and your maker's manual is where to find the target.

What sag is

Sag is how much a suspension moves under just the static load of the rider1. Static means standing still. You're sitting or standing on the bike, not riding it.

A magazine guide puts it as a percentage: when you sit on the bike, the share of travel the suspension compresses is known as sag2.

Why makers care about it

Sag is often used as one setting when tuning a suspension for a rider, and spring preload is adjusted until the wanted amount is measured1. More preload means less sag1.

On an air fork, you change sag with air pressure. Coil forks use preload or a different spring. The page on air and coil springs explains the difference.

How to measure it and what to aim for

The method for measuring sag and the sag target both come from your own fork or shock manual. They differ by model, so this page gives no steps and no target percentage. Use the maker's manual for your exact product.

If you can't find the method or the target, don't guess and don't borrow a friend's figures. Ask the dealer or the maker, and leave the settings alone until you have an answer. A wrong guess costs you nothing to avoid, and a shop or the maker can usually tell you the right method for your model in a short message. Keep the model name and year of the fork or shock handy when you ask, because the answer depends on them.

Where the sag method and target come fromFind the owner's manualCheck the fork or shock maker's support pageAsk the dealer if neither helps
The method and the target are in your own manual.

Where your maker's numbers live

Makers publish their own targets. Fox's older owner's manual, from 2011, lists "set sag" and "set damping adjustments" as items in its service tables3. It's one of the things that maker lists for a new fork or shock.

For your own bike, look in this order:

  • The owner's manual that came with the bike
  • The fork or shock maker's support page for your exact model and year
  • A label or chart on the fork's lower leg, if it has one
  • The dealer, if you can't find any of these

The numbers differ by model, rider weight and sometimes whether the bike is an e-bike. Don't borrow another bike's figures.

If the reading looks wrong

Sinking too far or barely at all are both reasons to go back to the maker's chart for your weight. If the numbers still look off, a dealer or the maker's service center can look at the unit. For how often makers say to service them, see service intervals.

Where the facts come from

  1. Bicycle suspension, Wikipedia
  2. How to set the SAG on your E-MTB Suspension in ten Minutes, E-MOUNTAINBIKE Magazine
  3. Service Intervals (Fox owner's manual, 2011), FOX Factory