The fork has dials with labels you don't recognize. There may be a lever marked "lock" too. Here's what the common terms mean, in the order you'll probably meet them.
Damper
The damper is the part that slows the spring's movement.1 says it slows the fork or shock down as it responds to an impact. Wikipedia describes the usual design as forcing oil through one or more small openings2.
Every adjustment below is a change to the damper, not the spring.
Compression damping
Compression damping slows the rate of compression in a fork or rear shock2. Compression is the fork being pushed in, by a bump or by weight.
Some forks have a compression adjuster that changes how firm the suspension feels, which a magazine guide says can help on climbs1.
Rebound damping
Rebound is the rate at which the suspension returns to its original position after absorbing a shock2. The term often also means rebound damping, the adjustment that changes that speed.
More rebound damping makes the unit return more slowly2. Less makes it return faster. The labels on the dial often show a turtle and a rabbit, or plus and minus, but your manual says which direction does what for your model.
Lockout
Lockout is a mechanism that disables the suspension and makes it substantially rigid2. The same page says that can be wanted when climbing or sprinting, so the suspension doesn't soak up the rider's effort.
Some lockouts have a blow-off feature. It releases the lock when a large enough force hits it, to help prevent damage2.
A lockout lever can be on the fork or on the handlebar. If yours seems stuck or does nothing, the manual for your model is the place to start.
Which terms need a manual
Dial names, click counts and starting positions differ from maker to maker. Fox's older owner's manual lists "set damping adjustments" as its own item in the service tables3. The dials are part of setup.
When you're unsure, go to the maker's page for your fork or shock and look up its setup guide. Write down the starting settings before you change anything, so you can return to them. Take a photo of the dials, too.
Reading a spec sheet
A listing might say "adjustable rebound and compression with lockout." That's three controls. Rebound sets how fast the unit comes back out. Compression sets how firmly it resists being pushed in. Lockout shuts it down for smooth ground.
Spring settings are separate. Air pressure or a spring choice sets how far the unit sinks at rest, which is covered under sag. Damping changes only the speed of movement, not the fork's stiffness at rest.
Related pages
- What the parts are: How e-bike suspension works
- Setting the spring first: What sag means
Where the facts come from
- How to set the SAG on your E-MTB Suspension in ten Minutes, E-MOUNTAINBIKE Magazine
- Bicycle suspension, Wikipedia
- Service Intervals (Fox owner's manual, 2011), FOX Factory